Filter By:
- Brakes/Levers/Pads (70)
- Cranksets (15)
- Forks (1)
- Handlebars (11)
- Pedals (20)
- Saddles (17)
- Tires (111)
- Wheels (21)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Components

$12.99
Bolt on Avid's 20R Brake Pads for consistent, powerful braking. They're designed for use with linear-pull brakes.

$14.99
The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull.
- ReachAdjustment
-- Qwik-Adjust Barrel Adjuster
Bend Zone

$24.99 - $29.99
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

$24.99
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

$24.99
Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.

$29.99
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

$49.99
Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.

$64.99
The industry standard cable-actuated disc brake since its introduction is still popular due to smooth ball bearing operation and ease of installation and maintenance.
- All calipers have 74mm mounting bolt spacing
- For use with long cable-pull levers
- Pad retraction and spring tension are adjustable
- Includes steel-backed sintered pads
- Brake Caliper Type: Post Mount
- Brake Lever Actuation: Long Pull
- Hub/Disc Compatibility: 6-Bolt
- Rotor Included: No

$66.00
Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote for maximum convenience and ease of use.

$14.99
• Replacement hoods for Cane Creek SCR5 brake levers
• Soft, tacky rubber for a sure grip
• Available in black or gum

$29.99
Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability.
- SPD compatibility
- Weight (pair): 30g
- Float: 6 degrees
- Release angle: 15 or 20 degrees

$69.99
Crank Brothers' Eggbeaters are 4-sided, which makes them super easy to enter and exit. Their open design makes them shed mud and debris quickly, and these pedals feature 6-degrees of knee-friendly float. The Eggbeater 1s feature chromoly axles, stainless-steel springs, and steel bodies.

$25.00
CushCore tubeless air valves are specially designed to work with a CushCore tire insert. The air passageway is T-shaped, rather than a simple through-hole, which prevents the insert from obstructing air flow through the valve.
- Made from CNC machined from 6061 T-6 aluminum, anodized black
- Tapered rubber collar permanently bonded at the sealing interface
- The valve core can be removed to add tire sealant
- Valve locknut with o-ring seal and valve cap are included
- Sold as a set

$80.00
CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride.
- The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants
- The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim
- Fits tire widths 2.1 – 2.6" and rims with internal width 22 – 35mm
Includes
- 1 CushCore Insert
- 1 CushCore Tubeless Air Valve
- Installation Instructions

$149.00
CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride.
- The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants
- A specially designed tubeless air valve is included with each insert; allowing air to move through the valve without becoming obstructed by the insert
- The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim
- Fits tire widths 2.1 – 2.6" and rims with internal width 22 – 35mm
Includes:
- 2 CushCore Inserts
- 2 CushCore Tubeless Air Valves
- 4 Rim Stickers
- Installation Instructions

$149.00
CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride.
- The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants
- A specially designed tubeless air valve is included with each insert, allowing air to move through the valve without becoming obstructed by the insert
- The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim
- Fits tire widths 1.8" to 2.4" and inner rim widths 22mm to 32mm
Includes
- 2 CushCore Inserts
- 2 CushCore Tubeless Air Valves
- 4 Rim Stickers
- Installation Instructions

$24.99
- Adapts 35mm CenterLock rotor-mount splines to accept an International Standard 6-bolt, 44mm BCD rotor
- Does not fit Saint-style 47mm Oversize CenterLock, and will not work with thicker, aluminum-carrier Hope 2005+ style Mono-series rotors
- Designed for up to 210mm rotors
- Tabs in adapter mate to (6) M5 rotor bolt holes and is secured by CenterLock-style lockring, sandwiching 6-bolt rotor to adapter
- Lockring requires a 16-notch external bearing bottom bracket wrench
- CL-IS adapter is black and lockring is black with silver etching: 29g

$34.99
When mounting a wheel quickly and safely, the RWS system is untouchable. It combines the fast mounting of a conventional quick release with the force and safety of a fitting. The high-precision toothing at the inside of the lever allows you to fully tighten the axle and perfectly position the lever.
- Ratcheting system tightens skewers with turns rather than a cam
- Lever can be rotated into an ideal position after tightening
- For E-thru axle frames
- Length: 171mm
- Thread Pitch: 12 x 1.5mm

$89.99
- Straight gauge 2.0mm with cold forging technology
- Chrome nickel stainless steel with rolled threads. Black surface treatment resists scratches
- 222g @ 32h/265mm
- Box of 72
- Nipples sold separately

$94.10
DT Swiss' 350 MTB hub delivers the amazing performance you've come to expect from DT Swiss at an incredible value. Fast and reliable, these Center Lock disc hubs make rotor installation and removal super fast.

$119.99
- Double butted 2.0/1.8/2.0mm with cold forging technology
- Chrome nickel stainless steel with rolled threads
- 192g @ 32h/265mm
- Box of 100
- Nipples sold separately

$29.99
- Lock and unlock with special key
- Lightweight aluminum key is easy to carry
- Anti-rust CrMo axle, stainless steel springs

$12.99
Dimension Toe Straps.
- Durable metal buckle
- Multi-purpose strap can also be used as a lash strap for -bike touring or rear rack (caution: must be used to keep the strap tail out of the wheel)
- Poly leather (vegan) toe strap
- Velvet finish
- 450mm length

$18.65
Standard (15-degree) sweep in multiple heights to tailor rider's position.
- Straight-gauge aluminum general-purpose riser bars (not intended for downhill riding)
- May come in OEM packaging
- Bar Clamp Diameter (mm): 25.4
- Material: Aluminum
- Rise: 30mm, 60mm, 100mm
- Width: 620mm

$170.00
An exceptionally strong carbon fiber 35mm riser bar that’s built to descend. The M7 bar is designed for the most aggressive and demanding riders. Carbon fiber is the ideal material for a gravity bar because fiber orientation and bar shape can be controlled independently and developed in unison, resulting in a tuned flex profile that cannot be achieved with aluminum. This bar is tuned to be precise and responsive while absorbing fatigue-inducing chatter and taking the sting out of the biggest hits. The M7 bar features a trail-perfect 8-degree backsweep and 4-degree upsweep for your long-travel 29er, enduro race bike, or downhill machine.
- Material: Carbon
- Weight: 230g (10mm rise); 240g (25mm rise); 245g (40mm rise)
- Bar Width (Max): 800mm
- Bar Width (Min): 780mm
- Clamp Diameter: 35mm
- Backsweep: 8 Degrees
- Upsweep: 4 Degrees
- Torque Spec: Face Plate: 5.5Nm
- Torque Spec: Controls: 5.5Nm

$7.99
- Self-extracting bolts for BB30 cranks: includes puller cap that threads into BB30 crank arms
- Sold as singles
Page 1 of 9
Next page